Baltimore Key Bridge #9 – Mysteriously Missing Material.  Missing steel girders. Steel noodles, warped, wilted.  Amazingly vanished nuts and bolts.

Index . Oddity List . Official Story . Summary

Baltimore Key Bridge

Missing steel girders, bolts in gusset plates not sheared-off or mangled but absent as if never present

See also Part #46

See also Physics of Microwave Directed Energy Weapons, particularly uneven effects due to field interference patterning

SONAR. LIDAR. Military.
“sunk in mud”
“pancaking”
Like 911 Where did the towers go
Dr Judy Wood: They were turned mostly into dust whilst in mid-air
Brian S Staveley: Most floors were empty and so the material mostly did not exist

POSSIBLY MOLTEN, WILTED “NOODLE-LIKE” BENT STRUCTURAL STEEL GIRDERS WITHOUT CRACKING OR EVEN PAINT CHIPPING

SOMETIMES INSTA-RUSTED
just like 911

AMAZING MISSING NUTS & BOLTS
just like 911

Shortest part of trusswork was atop highest portion, 84-feet tall.  In 50-feet of channel and 10-feet of mud, still 24-feet would be sticking up above the water.

No part of the bridge would be submerged at all.

Top view of submerged steel trusswork.  Notice the amazing amount (~40%) that is simply not present in the upper image (taken 31 March) off-center left.

Missing steel girders. They are simply not present, as if "dustified" like most of the WTC in NYC on 911.
Missing steel girders. They are simply not present, as if “dustified” like most of the WTC in NYC on 911.

A few images exist of gusset plates completely missing all nuts and bolts, which is highly unusual the uniformity of the damage and apparent disintegration (of the nuts/bolts).

BELOW: Also unusual are the many gusset plates having only a few missing nuts and bolts.  Directed Energy Weapons are in a sense wave-interference fields, like poor radio reception in cities having tall bridges…sometimes the signal is there, sometimes not, depending upon positioning, geometry.  Interfering waves in beam weaponry exhibit the exact same characteristics.  Some nuts/bolts were (apparently) disintegrated, possibly as the structure shifted, or perhaps perturbations in the applied beam weapon (or due to atmospheric effects).

Many gusset plates exist showing missing nuts/bolts in places where there was no apparent stress — the plate looks perfectly fine but one or a few of the nuts/bolts are just gone.  It’s not like they weren’t installed; every nut and bolt was present, and now some are gone spotily, and gone as if never installed not sheared-off or bent/mangled (but still present) as would be normally expected.  Something else was at work, another kind of energy, that disintegrated some nuts/bolts whilst leaving alone the surroundings.

The insta-rust is also amazingly anomalous.  The FSK Bridge was painted regularly; no amount of this rust would have been permitted; it would have been cleaned and painted promptly.  Essentially all rust appearing in these images of the FSK Bridge happened within past month, and most likely 99% of it or more happened within the first few seconds as the steel was being melted by Directed Energy Weapons.

See Physics of Microwave Directed Energy Weapons, particularly uneven effects due to field interference patterning

https://www.youtube.com/watch?v=_n7_-34qeOk&t=136s
https://www.youtube.com/watch?v=_n7_-34qeOk&t=136s

Leave a Comment